Support & user guides

Bluetooth® technology will enable the user to link a compatible phone or device to the vehicle for hands free operation. Your Bluetooth® capable phone or device must be inside the vehicle for it to connect to the vehicle system. Select your phone manufacturer from the selection below to check compatibility.

Audio and Visual - Step by Step Instructions

Step 1
Press the HOME button on the centre console to bring up the main HOME page and select the NAV icon on the touchscreen. A map showing your current location and surrounding area will be displayed on the screen.
 
Step 2
To change the map view, select MENU from the Selector Bar at the bottom of the touchscreen then select Map View for the various menu options. You can also zoom in or out or move the map by placing your finger on the touchscreen and swiping in any direction.
 
Step 3
To input a Destination, select DESTINATION from the Selector Bar at the bottom of the touchscreen. You can input destinations manually using the keyboard display or use stored addresses such as those visited recently, in your Contacts, or Points of Interest, Crossroads or GPS co-ordinates. 
 
Step 4
Once you have input a Destination, select GO in the destination details screen view and the system will provide visual and voice prompts for route guidance.
 
Step 5
The Navigation system offers many display, route and guidance options that are easily accessed by selecting MENU from the Selector Bar at the bottom of the touchscreen. Familiarise yourself with all the options before driving and only operate the system if road and traffic conditions allow you to do so safely. For full instructions, refer to your Owner’s Handbook.
 

Was this helpful?

No Yes
Step 1
Once you have the item on screen that you wish to store as a Favourite, be it a phone number, destination, route, song, artist or album, simply display the Favourites buttons by touching the up arrow at the bottom of the touchscreen and sliding your finger up. Then touch and hold the respective Favourite screen button, wait for the beep, and then the item is stored on that Favourite button.
 
See Step 5 to edit your Favourites buttons.
Step 2
For example, to set a Destination Favorite, press the HOME button on the centre console to bring up the HOME page and touch the NAV icon on the touchscreen. Select DESTINATION, then RECENT from the Selector Bar at the bottom of the touchscreen, choose the destination from the list and follow the instructions in Step 1.
 
Step 3
To set a phone number as a Favourite, press the HOME button on the centre console to bring up the HOME page and touch the PHONE icon on the touchscreen. Select KEYPAD from the Selector Bar at the bottom of the touchscreen, input the phone number and follow the instructions in Step 1.
 
Step 4
To set an Album as a Favourite, repeatedly press the MEDIA button on the centre console to toggle to and select the desired source. Select BROWSE, then ALBUMS from the Selector Bar at the bottom of the touchscreen. Turn the MENU knob or use the up and down arrows on the touchscreen to scroll through the list, then choose the album and follow the instructions in Step 1.
 
Step 5
To edit your Favourites buttons, bring up the HOME page and touch the SETTINGS icon on the touchscreen. Select the relevant application, choose Manage Favourites from the menu and a three row view of your Favourites buttons will be displayed. You can then choose to DELETE or RENAME the Favourites button from the options in the Selector Bar at the bottom of the touchscreen.
 

Was this helpful?

No Yes
Step 1
Your Holden's MyLink system is able to store up to 60 favourites including radio stations, phone numbers, contacts, albums or artists, destinations or routes and home screen applications. These can be stored from the HOME screen, AUDIO, NAVIGATION or PHONE applications. Up to 15 Favourites buttons can be displayed per page. To view Favourites buttons, touch the up arrow at the bottom of the touchscreen and slide your finger up. To view another page, place your finger anywhere on the Favourites page and swipe left or right. 
 
Step 2
To set a radio station favourite, touch the AUDIO icon on the touchscreen HOME page then select RADIO from the Selector Bar at the bottom of the touchscreen or press the RADIO button on the centre console. Repeatedly press the RADIO button to choose either the AM or FM band. To tune the radio to the station you wish to set as a Favourite, press the forward or reverse arrow buttons on the centre console to automatically tune to the next available station. 
 
Step 3
Alternatively, from the RADIO homepage select TUNE from the Selector Bar, then Direct Tune from the menu and input the station frequency and confirm. You can also find the station you want in the Station Lists. Select BROWSE from the Selector Bar at the bottom of the touchscreen, then turn the MENU knob to display the station list or scroll through using the up and down arrows on the touchscreen to select the desired radio station.
 
Step 4
Once you have tuned the radio to the station you wish to set as a favourite, display the Favourites buttons by touching the up arrow at the bottom of the touchscreen and sliding your finger up.  
 
Step 5
Touch and hold the respective Favourite screen button to save the current radio station to that position. A beep will sound, confirming that the radio station has been stored on that Favourites button. 
 

Was this helpful?

No Yes
Step 1
Press the HOME button on the centre console to bring up the main HOME page and select the SETTINGS icon on the touchscreen. Select Bluetooth® to display the menu. Alternatively bring up the HOME page and select the PHONE icon on the touchscreen.
 
Step 2
Ensure your Bluetooth® device is in “discoverable mode” and select Pair Device from the menu on the touchscreen. Alternatively select Device Management to display a list of devices, choose the device and then select Pair Device. A PIN code will then be shown on the touchscreen and you can start the pairing process on your phone or device^.
 
Step 3
Depending on the device, either simply compare the code with that which appears on your Bluetooth® device and confirm by pressing YES or PAIR on the device and the touchscreen or enter the code into your Bluetooth® device and confirm. 
 
Step 4
Once the process is complete, if pairing through the SETTINGS application, the device list will appear on the screen. If pairing through the PHONE application, the PHONE menu will be displayed once the process is complete. 
 
Step 5
The Holden MyLink system allows up to five devices to be paired but only one can be connected at any one time. To connect your chosen device, select the SETTINGS icon on the HOME page on the touchscreen, select BLUETOOTH, then DEVICE MANAGEMENT and select the device from the list.
 
 
Things you need to know

Was this helpful?

No Yes
Step 1
Ensure your phone or compatible Bluetooth® device is paired and connected to the Holden MyLink system. Press the HOME button on the centre console to bring up the main HOME page and select the AUDIO icon on the touchscreen.
 
Step 2
Repeatedly select MEDIA on the Selector Bar at the bottom of the touchscreen to toggle through external audio sources or alternatively, press the MEDIA button on the centre console to choose the audio source.
 
Step 3
You can use the forward and reverse arrows and play/pause buttons on the screen or turn the MENU knob to pause, play, skip, rewind or forward tracks.
 
Step 4
To search for music on your device, select BROWSE from the Selector Bar at the bottom of the touchscreen. Depending on the device, you can search by Playlists, Artists, Albums, Songs, Genres or more and select from the lists displayed.
 
Things you need to know

Was this helpful?

No Yes
Step 1
Connect your Smartphone, iPod®, iPhone® or USB drive to the port located in the centre console between the front seats with a USB cable. Press the HOME button on the centre console to bring up the main HOME page and select the AUDIO icon on the touchscreen.
 
Step 2
Repeatedly select MEDIA on the Selector Bar at the bottom of the touchscreen to toggle through external audio sources or alternatively, press the MEDIA button on the centre console to choose the audio source.
 
Step 3
You can use the forward and reverse arrows and play/pause buttons on the screen or turn the MENU knob to pause, play, skip, rewind or forward tracks.
 
Step 4
To search for music on your device, select BROWSE from the Selector Bar at the bottom of the touchscreen. Depending on the device, you can search by Playlists, Artists, Albums, Songs, Genres or more and select from the lists displayed.
 
Step 5
To finish listening to music from your USB drive, iPod® or iPhone®, simply select another media source such as AM, FM or Bluetooth. Before disconnecting a USB drive, iPod® or iPhone®, you must select another media source to avoid potential damage to the device or MyLink system.
 
Things you need to know

Was this helpful?

No Yes
Step 1
Connect your USB Drive to the port located in the centre console between the front seats with a USB cable.  Press the HOME button on the centre console to bring up the main HOME page and select the AUDIO icon on the touchscreen. Repeatedly select MEDIA on the Selector Bar at the bottom of the touchscreen to activate the media sources or alternatively, press the MEDIA button on the centre console to choose the media source.
 
Step 2
Select BROWSE, then MORE on the Selector Bar at the bottom of the touchscreen and select Videos. A list of movie files will appear from which you can choose your desired movie.
 
Step 3
You can use the forward and reverse arrows and play/pause buttons on the screen or turn the MENU knob to pause, play, skip, rewind or forward movie files. 
 
Step 4
To display the Video menu, select MENU on the Selector Bar at the bottom of the touchscreen. Videos may only be played when the parking brake is applied.
 

Was this helpful?

No Yes

Audio and Visual - FAQs

MyLink supports most smartphones and MP3 players that can be plugged in via the USB port in the centre console storage bin. It also supports many different brands of USB flash drives.
The infotainment system supports song file formats including .mp3, .wma, .wav and .acc name extensions. Many iPod® and iPhone® models are also supported and for a full list refer to your owners’ manual.
It is recommended that iPhone® be connected by USB cable to obtain the best functionality and performance.
MyLink can recognize up to five different Bluetooth® enabled devices but only one can be connected at any time.
It will recognise the devices in the order in which they are listed on the Device List. If a device listed isn’t in the vehicle, MyLink will recognise this and immediately pair with the device that is in the vehicle.
Simply access your settings to see the list of different paired devices. Scroll through the list to find the device you’re looking for. Alternatively, you can also press the “Push to Talk” button and say “Change Phone.”

Phone - Step by Step Instructions

Step 1
To ensure you make the most of your smartphone’s connection with the Holden MyLink system, there are a number of things you can do to keep you fully connected on the road.
 
First up, always ensure you are running the latest operating system for your phone and all your favourite apps are updated.
 
Step 2
Keep the apps on your phone updated.
 
When using apps, such as Pandora, ensure 'conserve battery' or 'screen timeout' checkboxes are disabled in the app's settings menu, this will provide a more seamless app experience.
 
Step 3
To connect either an Android or Apple phone, make sure you use the manufacturer’s genuine USB cable for the best functionality.
 
Android users may find it helpful to unpair and repair the device.
 
Step 4
Ensure you fully power off and restart your phone at least once a week. Smartphones need to be refreshed on a regular basis to purge and clean up their memory and also correct various other glitches that can affect their performance.
 
Step 5
If you have any problems with your phone connection, you might find that disconnecting the USB cable and unpairing the Bluetooth connection will help. Once you have disconnected everything, also try turning the phone off then on again before you reconnect and pair it with the MyLink system to give it a full refresh.
 

Was this helpful?

No Yes
Step 1
Press the HOME button on the centre console to bring up the main HOME page and select the SETTINGS icon on the touchscreen. Select Bluetooth® to display the menu. Alternatively bring up the HOME page and select the PHONE icon on the touchscreen.
 
Step 2
Ensure your Bluetooth® device is in “discoverable mode” and select Pair Device from the menu on the touchscreen. Alternatively select Device Management to display a list of devices, choose the device and then select Pair Device. A PIN code will then be shown on the touchscreen and you can start the pairing process on your phone or device^.
 
Step 3
Depending on the device, either simply compare the code with that which appears on your Bluetooth® device and confirm by pressing YES or PAIR on the device and the touchscreen or enter the code into your Bluetooth® device and confirm. 
 
Step 4
Once the process is complete, if pairing through the SETTINGS application, the device list will appear on the screen. If pairing through the PHONE application, the PHONE menu will be displayed once the process is complete. 
 
Step 5
The Holden MyLink system allows up to five devices to be paired but only one can be connected at any one time. To connect your chosen device, select the SETTINGS icon on the HOME page on the touchscreen, select BLUETOOTH, then DEVICE MANAGEMENT and select the device from the list.
 
 
Things you need to know

Was this helpful?

No Yes
Step 1
Press the HOME button on the centre console to bring up the main HOME page and select the PHONE icon on the touchscreen.  If necessary select KEYPAD from the Selector Bar at the bottom of the touchscreen.
 
Step 2
Enter the phone number using the keypad displayed on the touchscreen and press the CALL icon on the screen. Alternatively press the PUSH TO TALK button on the steering wheel control.
 
 
Step 3
To make a call using your phone book, select CONTACTS from the Selector Bar at the bottom of the touchscreen, then use the up and down arrows on the screen to scroll through and select the person you wish to call.
 
To access a number using call history, select RECENT from the Selector Bar at the bottom of the touchscreen, then select the contact you wish to call from the list. Missed calls are highlighted in red.
 
Step 4
By selecting a contact, the system will automatically dial the number and mute the audio if necessary. To end a call, touch the touch the END icon on the touchscreen or press the MUTE/END CALL button on the steering wheel.
 
Things you need to know

Was this helpful?

No Yes
Step 1
When your mobile phone is paired and connected to the Holden MyLink system, you are able to receive, listen to and send text messages through the MyLink system. Not all phones support this function and you might first need to enable the transmission of text data on your phone.
 
Step 2
Press the HOME button on the centre console to bring up the main HOME page and select the TEXT icon on the touchscreen. When you receive a new text message, you will see a message with the name or number of the sender and beginning of the message shown on the touchscreen.
 
Step 3
Select INBOX from the Selector Bar at the bottom of the touchscreen to open the menu and select the message to VIEW on screen. You can then choose to LISTEN to the message, CALL, the sender, REPLY to or DELETE the message from the options on the Selector Bar.
 
Step 4
If you choose to REPLY, you can select from a list of predefined text responses which can be managed through the SETTINGS application. 
 
Things you need to know

Was this helpful?

No Yes
Step 1
Your Holden is equipped with a speech recognition system that enables you to command the MyLink system to carry out a number of tasks such as dialing a phone number, changing the audio source or song, or directing the navigation system without having to take your hands off the steering wheel.
 
Step 2
To start using the speech recognition system, press the Push to Talk button on the steering wheel controls. Alternatively select VOICE from the Selector Bar at the bottom of the touchscreen on main menus. The audio system will mute and you will hear a prompt to say a Command. Wait until you hear a beep then say your Command.
 
Step 3
If you don’t hear a beep, make sure the volume is turned up. You can adjust the volume of voice prompts using the + and - buttons on the steering wheel. When the system is active and ready for input, the speech recognition symbol on the display screen changes from black to red. 
 
Step 4
Speak clearly and normally. Commands are available for a range of Audio, Phone and Navigation functions and for more information on specific Commands, please refer to your Owner’s Handbook.
 
Step 5
To cancel Voice Control or a particular Command, press the MUTE/END CALL button on the steering wheel controls or say Exit or Cancel. 
 
Things you need to know

Was this helpful?

No Yes

Phone - FAQs

There can be a number of factors that may influence the performance of your infotainment system when your phone and the myLink system are connected. We recommend you watch our 'Top Tips for Phone Connectivity' video tutorial located under the 'Phone' tab of this page to ensure you're getting the best connection between your device and the system as possible.
Most phones are compatible. See www.holden.com.au for details of compatible phones. Refer to the tutorial section of this site for more information.
 
You can find a compatible phone list at www.holden.com.au in the vehicle owners section or a helpful link is provided on the home page of myHolden Connect.
 
Check your mobile device operator’s manual for information on how to switch on “discoverable mode”. Once you have done this, follow the steps in the myHolden Connect tutorial.
If your phone fails to pair successfully with the system, turn your phone off. After a few seconds, turn it on and restart the pairing process.
Slowing your speech down can assist. Wait for the beep before you start speaking, avoid long pauses and speak in a moderate volume.
Text messages are only displayed on the screen when the vehicle is travelling slower than 8km/h.
Siri is available on some Apple iOS products and can be used in an “eyes free” mode through the Voice Control system to make and receive phone calls, select and play music, read out and compose text messages, and more. Please refer to the Apple website for further information. www.apple.com.au
 
Yes, if you are making a phone call. When plugging in a compatible Android phone for the first time to use Android Auto, the system will automatically initiate the Bluetooth pairing process, to make it easier to set up. If you have already paired Bluetooth, there will be a “Bluetooth Connected” pop-up.
Yes. In your vehicle’s infotainment system, go to 'Settings' and then change your 'Android Auto' settings.
Yes. In your vehicle’s infotainment system, go to the settings and then disable Android Auto. You can turn Android Auto back on at any time again.
Please verify that you followed the instructions on getting started with Android Auto. Make sure that Android Auto is enabled in the settings of your infotainment system and connect your phone with a factory-provided USB cable. After connecting, certain device settings may need to be confirmed on your phone. Verify that your infotainment system’s date and time settings are accurate.
In order to use this technology, your phone must be USB tethered. This also allows your device to charge while it’s in use. For best performance, use your device’s OEM/factory-provided USB cable. Aftermarket or third-party cables may not work. Note: When using Android Auto, you will be prompted to Bluetooth-pair your device upon plugging it in to the USB port.
No. The phone’s display is disabled once you launch Android Auto.
Compatibility with Android Auto is a functionality of the embedded myLink infotainment system and is not a separate feature, so it carries no additional cost. Some apps that you access in the vehicle through the compatible phone may enable in-app purchases or use your phone’s data, which could impose additional costs, especially when roaming. That includes music streaming apps and navigation apps, for example.

Vehicle Operating - Step by Step Instructions

Step 1
Press the HOME button on the centre console to bring up the main HOME page and select the NAV icon on the touchscreen. A map showing your current location and surrounding area will be displayed on the screen.
 
Step 2
To change the map view, select MENU from the Selector Bar at the bottom of the touchscreen then select Map View for the various menu options. You can also zoom in or out or move the map by placing your finger on the touchscreen and swiping in any direction.
 
Step 3
To input a Destination, select DESTINATION from the Selector Bar at the bottom of the touchscreen. You can input destinations manually using the keyboard display or use stored addresses such as those visited recently, in your Contacts, or Points of Interest, Crossroads or GPS co-ordinates. 
 
Step 4
Once you have input a Destination, select GO in the destination details screen view and the system will provide visual and voice prompts for route guidance.
Step 5
The Navigation system offers many display, route and guidance options that are easily accessed by selecting MENU from the Selector Bar at the bottom of the touchscreen. Familiarise yourself with all the options before driving and only operate the system if road and traffic conditions allow you to do so safely. For full instructions, refer to your Owner’s Handbook.
 

Was this helpful?

No Yes
Step 1
Your Holden's Hill Descent Control System (HDC) is designed to automatically limit the vehicle’s speed when travelling on steep declines off-road without the need to press the brake pedal. For manual gearbox models, the system operates within a range of between 7km/h and 30km/h while in Colorados fitted with an automatic transmission, the descent speed range is between 4km/h and 30km/h.
 
Step 2
To activate the system, press the HDC button on the centre console at speeds below 50km/h. A green DSC graphic will be illuminated in the instrument panel.
 
Step 3
When approaching the descent, apply the brakes to slow the car to your desired speed within the operating range and release the brake pedal. The green graphic in the instrument cluster will flash indicating the system is operating and your selected speed will be maintained. 
 
Step 4
At any time you can increase or decrease the speed within the HDC range by applying the brake or accelerator. While applying the brake or accelerator, the green graphic stops flashing but once you lift your foot off the respective pedal, the system will re-engage and limit the car’s descent to the new speed.
 
Step 5
If your speed exceeds 30km/h the HDC returns to standby mode and will automatically be deactivated if the speed exceeds 50km/h. To manually deactivate the DCS, press the button on the centre console at speeds under 50km/h and the green graphic on the instrument cluster will be extinguished.
 
Things you need to know

Was this helpful?

No Yes
Step 1
Your Holden is fitted with a remote vehicle start system that allows the vehicle to be started via a button on the remote control key fob to initiate the climate control and pre-condition the cabin.
 
Step 2
Aim the remote control key fob at the vehicle and press the remote vehicle start button. Immediately, again press and hold the remote vehicle start button for at least four seconds or until the turn signal lamps flash. The engine will start and the parking lights will remain on while the engine is running.
 
Step 3
The doors will remain locked but the climate control may come on as per its last settings and the engine will continue to run for 10 minutes. This can be further extended for another 10 minutes by repeating the instructions in Step 2.
 
Step 4
If you unlock and enter the vehicle while the engine is running, turn the ignition switch to ON. If the engine is no longer running, start the vehicle as normal.
 
Step 5
To cancel a remote vehicle start, aim the key fob at the vehicle and press and hold the remote vehicle start button until the parking lights turn off. Then enter the vehicle, turn on the hazard warnings lights, then turn the vehicle on then off again.
 
*Where fitted
*Automatic Transmission Only
 
 

Was this helpful?

No Yes
Step 1
Your Colorado may be fitted with Rear Cross Traffic Alert that will display a warning triangle with an arrow on the RVC Screen to warn of traffic coming from either direction, behind the vehicle. 
 
Step 2
When an object is detected, three beeps sound on the left or right side, depending on the direction of the detected vehicle. This system detects objects coming from up to 20 m (65 ft) from the left or right side behind the vehicle.
 
Step 3
Use caution while backing up when towing a trailer, as the RCTA detection zones that extend out from the back of your vehicle do not move further back when a trailer is towed.
Step 4
 For full instructions, refer to your Colorado Owner's Handbook.
* Where fitted.
 
Things you need to know

Was this helpful?

No Yes
Step 1
Your Colorado is fitted with a Park Assist system that uses front and rear sensors to detect obstacles in the front and rear of the vehicle when the moving forward or reversing. The system is automatically activated when the ignition is turned on, a gear is selected and the park brake is released.
 
Step 2
The system will remain operational until the vehicle exceeds 15km/h. If it detects an obstacle a warning tone will sound with repetitions increasing as the distance decreases. At a distance of about 30cm, the warning tone sounds continuously.
Step 3
When reverse gear is selected, if the system detects two objects at the front and rear, only the closest object will be indicated. If the two objects are the same distance from the car, the object at the rear will be given priority.
Step 4
To manually turn off the Park Assist system, press the Park Assist button on the left hand side of the centre console. To turn it on again, press the button once and a light in the button will illuminate. Alternatively select reverse gear to turn the system on.
 
Things you need to know

Was this helpful?

No Yes
Step 1
The Blind Spot Alert detects other vehicles in your blind spot beside and behind your car in adjacent lanes. Its sensors cover an area of up to 3.5m on both sides of the vehicle and is automatically activated.
 
Step 2
When a vehicle is detected in your blind spot, a warning symbol lights up in the relevant side mirror indicating that it may be unsafe to change lanes.
Step 3
The Blind Spot Alert can be deactivated through vehicle personalisation using the Vehicle Settings and Collision/Detection Systems menus on your MyLink system
Step 4
For full instructions, refer to your Colorado Owner's Handbook.
* Where fitted.
 
Things you need to know

Was this helpful?

No Yes
Step 1
The Forward Collision Alert (FCA) automatically provides visual and audible warnings if you approach a vehicle in front of you too quickly. The system detects vehicles up to 150m ahead and operates above walking speed.
Step 2
Visual warnings are displayed in the Driver Information Centre display in the instrument cluster. A green car symbol will appear when a vehicle is detected ahead. If you approach too fast, the symbol will change to yellow and flash and sound rapid beeps.
Step 3
You can set the alert sensitivity to near, medium or far for different traffic conditions. Press the Gap Adjust button repeatedly on the left hand side of the steering wheel controls to scroll through the options and the current setting will be displayed in the DIC.
Step 4
You can deactivate/activate the Forward Collision Alert through the Holden MyLink system by accessing the Settings application and choosing the vehicle menu.
Things you need to know

Was this helpful?

No Yes
Step 1
The Lane Departure Warning (LDW) provides a visual and audible warning if your car crosses a detected lane marking without using the turn signal. To turn the system on or off, press the LDW button on the left hand side of the steering wheel. The button is lit when the system is on.
Step 2
When the car is started, the LDW symbol will appear on the instrument panel briefly to let you know it is activated. The system operates at speeds above 56km/h and if it detects right or left lane markings, the symbol appears green.
Step 3
If you cross the lane marking without using the turn signal, the symbol turns to amber and three chimes are sounded. The alert chimes are directional ie: they sound from the speaker on the side of the vehicle where you are crossing the lane marking.* Where fitted.
Things you need to know

Was this helpful?

No Yes
Step 1
Your Holden is fitted with a Diesel Particulate Filter as part of the exhaust system to help reduce emissions. To prevent clogging of the filter, the system periodically goes through a self cleaning process however under certain conditions such as stop/start city traffic it may not be able to complete the process.
 
Step 2
If this occurs, a “Diesel Partic Filter is Full Continue Driving” message will appear on the Driver Information Centre display in the instrument cluster. To clean the filter, continue driving until the message extinguishes which may take up to 30 minutes. Turning the engine off while the message is displayed will prevent the process from completing.
 
Step 3
If the self cleaning process has been interrupted several times without completion a “Diesel Partic Filter is Full Continued Driving Mandatory” message will be displayed. To clean the filter continue driving until the message extinguishes. This may take up to 30 minutes.
 
Step 4
If the self cleaning process is still not completed, a SVS (Service Vehicle Soon) message is displayed indicating the self cleaning process is not feasible so you should contact your Holden service centre for a dealer service.
 
Step 5
If the DPF is not cleaned, a Malfunction Indicator Lamp will illuminate and “Engine Power Reduced” message will appear in the Driver Information Centre display in the instrument cluster. A dealer service will be necessary.
 
Things you need to know

Was this helpful?

No Yes

Vehicle Operating - FAQs

Navigation maps are stored in the system and do require regular updating to take into account new roads. To check for the availability of updated maps, see your local Holden dealer.
Your Holden is fitted with ultrasonic sensors on the front and rear bumpers to help detect objects in front of and behind the car. When an object is detected, the Parking Assist system provides an audible warning and a visual image on the Driver Information Centre (DIC) display in the instrument cluster.
The front and rear sensors are automatically activated when R (Reverse) gear is selected. After the gearshift lever is moved out of Reverse, the rear sensors switch off. The front sensors are automatically activated when driving forwards and remain on until the vehicle exceeds 11km/h.
Yes. To manually deactivate the system when Reverse gear is engaged, press the Park Assist button on the centre console. The LED light will go out, a Park Assist Off message will appear on the DIC display and the system will remain inactive until the next time Reverse gear is selected.
If you are not receiving Side Blind Zone Alerts, check the feature is not turned off through the radio customisation menu. If the feature is on, ensure the rear bumper is clean of any dirt or mud as this can prevent the alerts from activating. Any damage to the rear bumper where the radar is located can also cause false or no alerts.
Side Blind Zone Alert will not report an object if the difference in speed between your vehicle and object of interest exceeds 16kph. If your vehicle is being overtaken, you will not receive an alert if the difference in speed is 65kph or greater.

Bluetooth® Wireless Technology:

Bluetooth® Compatibility...

Model Software Call Handling Enhanced Voice Control Phonebook Access Audio Streaming SMS Text Messaging
  • Compatible - The tested phone and software version is compatible with the Bluetooth® function listed.
  • Partially Compatible - The tested phone and software version may only partially function with the Bluetooth® function listed.
  • Not Compatible - The tested phone and software version is not compatible with the Bluetooth® function listed.
  • Text Message - Feature available with Apple CarPlay® and Android® Auto.
iPod, iPhone and Apple CarPlay are registered trademark of Apple Inc. Android is a registered trademark of Google Inc.

Important Information

The smartphones listed have been tested for compatibility with vehicles fitted with Holden Mylink by a third party under controlled conditions. Performance of your smartphone in Holden vehicles may vary in the future based on smartphone software versions and network coverage, therefore this information should be used as a guide only. If your smartphone supports Bluetooth® but is not listed on the website, this simply means it has not been tested for compatibility. However, there is a possibility that some of the Bluetooth® features may still work, but neither partial nor full functionality can be assured.

For these reasons please consult your local Holden Dealership or call Holden Customer Care on 1800 GM Holden (1800 46 465 336) if you require further information. Please note that smartphones are warranted by their manufacturer, not Holden.

Things you need to know

How can we improve this Tutorial?

We will endeavour to get back to you if possible

What do you need help with?

e.g. My bluetooth doesn't connect, and I keep getting an error mesage 404 on my phone.

Thank You

We appreciate your feedback.

Holden New Zealand Dealers

Street View
X