Support & user guides

Bluetooth® technology will enable the user to link a compatible phone or device to the vehicle for hands free operation. Your Bluetooth® capable phone or device must be inside the vehicle for it to connect to the vehicle system. Select your phone manufacturer from the selection below to check compatibility.

Audio and Visual - Step by Step Instructions

Step 1
Press the HOME button on the centre console to bring up the main Home Page menu icons and touch PHONE on the touchscreen. Alternatively press the PHONE button on the centre console or the CALL button on the steering wheel control.
 
Step 2
Ensure your Bluetooth® device is in “discoverable mode”. Touch the SEARCH DEVICE icon on the touchscreen and select the desired device from the list on the touchscreen you wish to pair. A PIN code will then be shown on the touchscreen and you can start the pairing process on your phone or device^.
 
Step 3
Depending on the device, either simply compare the code with that which appears on your Bluetooth® device and confirm by pressing YES or PAIR on the device and the touchscreen or enter the code into your Bluetooth® device and confirm. 
 
Step 4
Once the process is complete, the “Phone” screen will be displayed on the touchscreen and the system will automatically download your phonebook. 
 
Step 5
The Holden MyLink system allows up to ten devices to be paired but only one can be connected at any one time. To connect your chosen device, touch the SETTINGS icon on the home page menu on the touchscreen, select BLUETOOTH , then DEVICE MANAGEMENT and select the device from the list.
 
Things you need to know

Was this helpful?

No Yes
Step 1
The Holden MyLink system is able to store up to 25 favourite AM or FM radio stations across five pages. To set a radio station favourite, press the HOME button on the centre console to bring up the main Home Page menu icons and touch the AUDIO icon on the touchscreen.
 
Step 2
Touch the SOURCE icon on the touchscreen and select either the AM or FM band. To tune the radio to the station you wish to set as a Favourite, press the forward or reverse arrow buttons on the centre console to automatically tune to the next available station or touch the TUNE icon on the screen and input the station frequency and touch GO. 
Step 3
You can also find the station you want in the Station List. Touch the AM or FM icon on the touchscreen to select the band you want, touch the MENU icon on the touchscreen, select STATION LIST, and scroll through using the up and down arrows to select the desired radio station.
 
Step 4
Once you have tuned the radio to the station you wish to set as a favourite, touch the right or left arrows on the Selector Bar at the bottom of the touchscreen to choose your desired favourites page. 
 
Step 5
Touch and hold down your desired Preset position on the Selector Bar to save the current radio station to that position. A beep will sound, confirming that the radio station has been stored on that Preset position. 
 

Was this helpful?

No Yes
Step 1
Connect your USB drive to the port located in the centre console with a USB cable. A Picture on the USB Drive will automatically be displayed on the touchscreen.
 
Step 2
If a USB Drive is already connected, press the HOME button on the centre console to bring up the main Home Page menu icons and touch GALLERY on the touchscreen. Touch the PICTURE icon on the screen and select the image you wish to view from the list.
 
Step 3
You can use the arrows at either side of the image to view the next or previous picture or touch the icons on the control bar at the bottom of the screen to rotate, enlarge, fit to full screen or play a slideshow.
 
Step 4
To adjust Brightness or Contrast or change other settings, touch the MENU icon on the screen and choose from the list displayed.
 
Things you need to know

Was this helpful?

No Yes
Step 1
Connect your USB drive to the port located in the centre console with a USB cable. Press the HOME button on the centre console to bring up the main Home Page menu icons and touch GALLERY on the touchscreen.
 
Step 2
Touch the MOVIE icon on the screen and select the movie you wish to play from the list.
 
Step 3
Use the forward and reverse arrows, play/pause or fit icons on the control bar at the bottom of the screen to pause, play, skip to the next or previous movie, fast forward or rewind the current movie or fit to full screen. The control bar icons can be hidden or displayed at any time by tapping anywhere on the touchscreen.
 
Step 4
To adjust Brightness or Contrast or change other settings, touch the MENU icon on the screen and choose from the list displayed.
 
Things you need to know

Was this helpful?

No Yes
Step 1
Connect your Smartphone, iPod®, iPhone® or USB drive to the port located in the centre console with a USB cable. Press the HOME button on the centre console to bring up the main Home Page menu icons and touch AUDIO on the touchscreen.
 
Step 2
Touch the SOURCE icon on the touchscreen then touch either the USB or iPod® icon on the touchscreen to play music from the connected device. You can set the system to automatically play music from your device when it is connected by turning on the USB Auto Launch feature in the main SETTINGS menu.
 
Step 3
To pause, play, skip, rewind or forward tracks, use the forward and reverse arrows, play/pause or random icons on the screen.
 
Step 4
To search for music on your device, touch the MENU icon on the touchscreen and select BROWSE MUSIC from the menu list. Depending on the device, you can search by Playlists, Artists, Albums, Songs, Genres or more and select from the lists displayed.
 
Step 5
To finish listening to music from your USB drive, iPod® or iPhone®, simply touch the SOURCE icon on the touchscreen and select another media such as AM, FM or Bluetooth. Before disconnecting an iPod® or iPhone®, you must select another media source.
 
Things you need to know

Was this helpful?

No Yes
Step 1
Ensure your phone or compatible Bluetooth® device is paired and connected to the Holden MyLink system. Press the HOME button on the centre console to bring up the main Home Page menu icons and touch AUDIO on the touchscreen.
 
Step 2
Touch the SOURCE icon on the touchscreen then touch the BLUETOOTH icon on the touchscreen to play music from the connected device.
 
Step 3
You can use the forward and reverse arrows, play/pause or random icons on the screen to pause, play, skip, rewind or forward tracks.
 
Step 4
To search for music on your device, touch the MENU icon on the touchscreen and select BROWSE MUSIC from the menu list. Depending on the device, you can search by Playlists, Artists, Albums, Songs, Genres or more and select from the lists displayed.
 
Things you need to know

Was this helpful?

No Yes

Audio and Visual - FAQs

DAB stands for 'Digital Audio Broadcasting'. DAB stations are indicated by the program name instead of the broadcasting frequency. Besides high-quality digital audio services, DAB is also able to transmit program-associated data and a multitude of other data services. Another advantage is that interference caused by stations that are on nearby frequencies (a phenomenon that is typical of AM and FM reception) does not occur with DAB.
MyLink supports most smartphones and MP3 players that can be plugged in via the USB port in the centre console. It also supports many different brands of USB flash drives.
The infotainment system supports song file formats including MP3, WMA, WAV, ACC, OGG, and AIFF files. For a full list refer to your owners’ manual.
MyLink supports movie formats with .avi, and .mp4 file extensions. A movie file may not always be played depending on the Codec format. Refer to your owner’s handbook for further information.
MyLink supports picture file formats with .jpg, .bmp, .png and .gif file extensions.
No. Movie or picture viewing is not available while driving. You must be stationary for manual vehicles and automatic transmission vehicles must be in park.
Picture and Movie file playback from an iPhone®/iPod® is not supported by the system. Picture and Movie files loaded on USB Drives can be played through the Holden MyLink system.

Phone - Step by Step Instructions

Step 1
To ensure you make the most of your smartphone’s connection with the Holden MyLink system, there are a number of things you can do to keep you fully connected on the road.
 
First up, always ensure you are running the latest operating system for your phone and all your favourite apps are updated.
 
Step 2
Keep the apps on your phone updated.
 
When using apps, such as Pandora, ensure 'conserve battery' or 'screen timeout' checkboxes are disabled in the app's settings menu, this will provide a more seamless app experience.
 
Step 3
To connect either an Android or Apple phone, make sure you use the manufacturer’s genuine USB cable for the best functionality.
 
Android users may find it helpful to unpair and repair the device.
 
Step 4
Ensure you fully power off and restart your phone at least once a week. Smartphones need to be refreshed on a regular basis to purge and clean up their memory and also correct various other glitches that can affect their performance.
 
Step 5
If you have any problems with your phone connection, you might find that disconnecting the USB cable and unpairing the Bluetooth connection will help. Once you have disconnected everything, also try turning the phone off then on again before you reconnect and pair it with the MyLink system to give it a full refresh.
 

Was this helpful?

No Yes
Step 1
Press the HOME button on the centre console to bring up the main Home Page menu icons and touch PHONE on the touchscreen. Alternatively press the PHONE button on the centre console or the CALL button on the steering wheel control.
 
Step 2
Ensure your Bluetooth® device is in “discoverable mode”. Touch the SEARCH DEVICE icon on the touchscreen and select the desired device from the list on the touchscreen you wish to pair. A PIN code will then be shown on the touchscreen and you can start the pairing process on your phone or device^.
 
Step 3
Depending on the device, either simply compare the code with that which appears on your Bluetooth® device and confirm by pressing YES or PAIR on the device and the touchscreen or enter the code into your Bluetooth® device and confirm. 
 
Step 4
Once the process is complete, the “Phone” screen will be displayed on the touchscreen and the system will automatically download your phonebook. 
 
Step 5
The Holden MyLink system allows up to ten devices to be paired but only one can be connected at any one time. To connect your chosen device, touch the SETTINGS icon on the home page menu on the touchscreen, select BLUETOOTH , then DEVICE MANAGEMENT and select the device from the list.
 
Things you need to know

Was this helpful?

No Yes
Step 1
The Holden MyLink system allows you to directly access the Siri app on your iPhone®. Siri is available on a number of Apple iOS products and can be used in an “eyes free” mode through the car’s Voice Control system. Siri can be used to make and receive phone calls, select and play music, read out and compose text messages, find calendar information and more.
 
Step 2
Ensure your phone is paired and connected with the Holden MyLink system and the Siri app is activated on your phone.
 
Step 3
Press and hold the CALL button on the steering wheel controls to activate Voice Control. The audio system will mute and you will hear a prompt “Please say a Command”. Wait until you hear a beep then say your Command.
 
Step 4
Say “Use Siri”. Once you hear the Siri tone, say a command. While in eyes free mode, Siri will not provide answers that require displaying a web page. For a full list of Siri commands refer to the Apple website.
 
Step 5
To finish a Siri session using the Voice Control, press the Mute/End Call button on the steering wheel controls.
 
Things you need to know

Was this helpful?

No Yes
Step 1
Press the HOME button on the centre console to bring up the main Home Page menu icons and touch PHONE on the touchscreen to display the “Phone” screen. 
Step 2
Enter the phone number using the keypad displayed on the touchscreen and press the Phone icon on the screen. Alternatively press the PHONE button on the centre console or the CALL button on the steering wheel control.
Step 3
The system will dial the number and mute the audio if necessary. To end a call, touch the Hang Up icon on the touchscreen or press the Mute/End Call button on the steering wheel.
 
Things you need to know

Was this helpful?

No Yes
Step 1
Press and hold the CALL button on the steering wheel controls to activate Voice Control. The audio system will mute and you will hear a tone. After the tone you can say “Phone” and the system will respond with questions to ascertain who or what number you would like to call.
 
Step 2
You can simplify this by making direct commands, for instance by saying “Dial 0123456778” or “Call David Smith mobile” or “Redial last number”. For more information on Voice Commands, refer to your Owner’s Handbook.
 
Step 3
To finish the call, press the End Call/Mute button on the steering wheel controls. To cancel a voice command at any time, say “Cancel” or for more options, say “Help”.
 
Things you need to know

Was this helpful?

No Yes
Step 1
Press the HOME button on the centre console to bring up the main Home Page menu icons and touch PHONE on the touchscreen to display the “Phone” screen. 
 
Step 2
To access your phone book, touch the CONTACTS button on the touchscreen, then use the up and down arrows on the screen to scroll through and select the person you wish to call. To search for a particular person, touch the Search button on the screen and use the keypad to input the name of the person you wish to call and select it from the list.
 
Step 3
To access a number using call history, touch the CALL HISTORY button on the touchscreen, select from All Calls, Dialed Call, Missed Call or Received Call by touching the appropriate button on the screen, then select the contact you wish to call from the list. 
 
Step 4
To make the call, press the Phone icon on the screen or alternatively press the PHONE button on the centre console or the CALL button on the steering wheel control.
 
Step 5
The system will dial the number and mute the audio if necessary. To end a call, touch the Hang Up icon on the touchscreen or press the Mute/End Call button on the steering wheel.
 
Things you need to know

Was this helpful?

No Yes

Phone - FAQs

There can be a number of factors that may influence the performance of your infotainment system when your phone and the myLink system are connected. We recommend you watch our 'Top Tips for Phone Connectivity' video tutorial located under the 'Phone' tab of this page to ensure you're getting the best connection between your device and the system as possible.
Most phones are compatible see www.holden.com.au for details of compatible phones. Refer to the tutorial section of this site for more information.
You can find a compatible phone list at www.holden.com.au in the vehicle owner’s section or a helpful link is provided on the home page of Holden Connect.
Check your mobile device operator’s manual for information on how to switch on “discoverable mode”. Once you have done this, follow the steps in the Holden Connect tutorial.
If your phone fails to pair successfully with the system, turn your phone off. After a few seconds, turn it on and restart the pairing process.
Slowing your speech down can assist. Wait for the beep before you start speaking, avoid long pauses and speak in a moderate volume.
Yes, if you are making a phone call. When plugging in a compatible Android phone for the first time to use Android Auto, the system will automatically initiate the Bluetooth pairing process, to make it easier to set up. If you have already paired Bluetooth, there will be a “Bluetooth Connected” pop-up.
Yes. In your vehicle’s infotainment system, go to 'Settings' and then change your 'Android Auto' settings.
Yes. In your vehicle’s infotainment system, go to the settings and then disable Android Auto. You can turn Android Auto back on at any time again.
Please verify that you followed the instructions on getting started with Android Auto. Make sure that Android Auto is enabled in the settings of your infotainment system and connect your phone with a factory-provided USB cable. After connecting, certain device settings may need to be confirmed on your phone. Verify that your infotainment system’s date and time settings are accurate.
In order to use this technology, your phone must be USB tethered. This also allows your device to charge while it’s in use. For best performance, use your device’s OEM/factory-provided USB cable. Aftermarket or third-party cables may not work. Note: When using Android Auto, you will be prompted to Bluetooth-pair your device upon plugging it in to the USB port.
No. The phone’s display is disabled once you launch Android Auto.
Compatibility with Android Auto is a functionality of the embedded myLink infotainment system and is not a separate feature, so it carries no additional cost. Some apps that you access in the vehicle through the compatible phone may enable in-app purchases or use your phone’s data, which could impose additional costs, especially when roaming. That includes music streaming apps and navigation apps, for example.

Vehicle Operating - Step by Step Instructions

Step 1
If the battery of the electronic key is weak or the remote control fails, you can use the mechanical key to unlock and lock the car using the driver’s door only. Press the button on the back of the electronic key fob to slide out the mechanical key blade.
Step 2
Remove the cap at the forward end of the driver’s door handle by inserting the key blade into the recess at the bottom of the cap and swivelling the key upwards. 
Step 3
Place the key blade into the lock in the driver’s side door handle and turn it clockwise to unlock the door. To unlock the other doors, pull on the inside door handle twice or press the Unlock button on the driver’s door panel. Note that unlocking the door using the mechanical key does not deactivate the Anti-Theft Alarm System which is only deactivated by switching on the ignition.
Step 4
To start the car, place the key in the front cup-holder transimtter pocket in a longitudinal direction, with the buttons facing upward. All other tags, coins or other objects must be removed. 
 
Press the clutch pedal for manual transmission, or the brake for automatic transmission and press the engine start/stop button.
Step 5
To lock the car when leaving, lock all doors except the driver’s door from inside by pressing the locking knob or press the Lock button on the driver’s door panel. Once outside the car, place the key into the lock in the driver’s side door handle and turn it anti-clockwise to lock the driver’s door. Replace the cap over the lock cylinder on the driver’s door handle.
 
Replace the battery in your electronic key system as soon as possible.

Was this helpful?

No Yes
Step 1
The Lane Keep Assist with Lane Departure Warning system is designed to avoid potential crashes due to unintentional movement out of the traffic lane and operates at speeds of between 60km/h and 180km/h where lane markings are available. 
 
Step 2
The system uses a forward facing camera to detect lane markings and to activate it, press the button on the centre console in front of the transmission lever. The LED in the button will illuminate and a green control icon will appear in the instrument cluster to indicate the system is ready to operate.
 
Step 3
If the vehicle starts to drift towards a lane marking without the driver using the turn signal, the system will gently and briefly turn the steering wheel to move the car back towards the centre of the lane and the control icon will change to yellow. The steering input by the system is intended to prompt the driver and you can overcome it with normal steering input.
 
Step 4
If the vehicle significantly departs from the lane without the turn signal being used, the control icon will flash and three chimes will sound in the car from the direction of the lane marker that has been crossed. 
 
Step 5
To turn the system off, press the button on the centre console. The system may also switch off if lane markings are ambiguous such as in construction zones or the lanes are too narrow, wide or curved. If only one lane marking is detected the system will only operate in respect to that side.
 
Things you need to know

Was this helpful?

No Yes
Step 1
The Forward Collision Alert (FCA) automatically provides visual and audible warnings if you approach a vehicle in front of you too quickly. The system detects vehicles up to 150m ahead and operates above walking speed.
Step 2
Visual warnings are displayed in the Driver Information Centre display in the instrument cluster. A green car symbol will appear when a vehicle is detected ahead. If you approach too fast, the symbol will change to yellow and flash and sound rapid beeps.
Step 3
You can set the alert sensitivity to near, medium or far for different traffic conditions. Press the Gap Adjust button repeatedly on the left hand side of the steering wheel controls to scroll through the options and the current setting will be displayed in the DIC.
Step 4
You can deactivate/activate the Forward Collision Alert through the Holden MyLink system by accessing the Settings application and choosing the vehicle menu.
Things you need to know

Was this helpful?

No Yes
Step 1
The Forward Collision Alert (FCA) automatically provides visual and audible warnings and emergency braking if you approach a vehicle in front of you too quickly. For vehicles fitted with standard Cruise Control that use a forward camera only, the system detects vehicles up to 60m ahead, while for those with the radar-based ACC it can detect vehicles up to 150m ahead, with both operating automatically at all speeds above walking pace. 
Step 2
When a vehicle is detected ahead, a green car symbol will appear in the instrument cluster and if you approach too fast, the symbol will change to yellow. If a collision seems imminent, a warning chime will sound, a collision alert symbol is displayed in the Driver Information Centre and a flashing red LED stripe is projected onto the windscreen. 
 
Step 3
You can set the alert sensitivity to near, medium or far for different traffic conditions. Press the Gap Adjust button repeatedly on the left hand side of the steering wheel controls to scroll through the options and the current setting will be displayed in the DIC.
 
Step 4
If the system detects that a collision is imminent, it will also prepare the brake system for rapid braking, increase the sensitivity of the brake assist function to enable the driver to quickly apply harder and faster braking or even apply automatic emergency braking at speeds up to 60km/h that may slow the vehicle to a complete stop.
 
Step 5
You can deactivate/activate the Forward Collision Alert on camera-based cars by repeatedly pressing the Gap Adjust button on the steering wheel or for radar-based systems through the Holden MyLink system by accessing the Settings application and choosing the vehicle menu.
 
Things you need to know

Was this helpful?

No Yes
Step 1
The Blind Spot Alert detects other vehicles in your blind spot beside and behind your car in adjacent lanes. Its sensors cover an area of up to 3.5m on both sides of the vehicle and is automatically activated.
 
Step 2
When a vehicle is detected in your blind spot, a warning symbol lights up in the relevant side mirror indicating that it may be unsafe to change lanes.
Step 3
The Blind Spot Alert can be deactivated through vehicle personalisation using the Vehicle Settings and Collision/Detection Systems menus on your MyLink system
Step 4
For full instructions, refer to your Holden Owner's Handbook.
* Where fitted.
 
Things you need to know

Was this helpful?

No Yes
Step 1
Your Holden is fitted with a Park Assist system that uses front and rear sensors to detect obstacles in the front and rear of the vehicle when the moving forward or reversing. The system is automatically activated when the ignition is turned on, a gear is selected and the park brake is released.
 
Step 2
The system will remain operational until the vehicle exceeds 15km/h. If it detects an obstacle a warning tone will sound with repetitions increasing as the distance decreases. At a distance of about 30cm, the warning tone sounds continuously.
Step 3
When reverse gear is selected, if the system detects two objects at the front and rear, only the closest object will be indicated. If the two objects are the same distance from the car, the object at the rear will be given priority.
Step 4
To manually turn off the Park Assist system, press the Park Assist button on the left hand side of the centre console. To turn it on again, press the button once and a light in the button will illuminate. Alternatively select reverse gear to turn the system on.
 
Things you need to know

Was this helpful?

No Yes
Step 1
Your Holden Astra is fitted with an Advanced Park Assist (APA) system to guide your car into a parallel or 90 degree parking space. Ensure your car is in Drive (D) or a forward gear and press the APA button on the right hand side of the centre console to search for a parallel parking space. Press and hold the button for two seconds to activate it to search for a 90 degree parking space.
Step 2
Drive forwards at less than 30km/h at a distance of between 0.5m and 1.5m from the parked cars. When the system detects a suitable parking space, a beep will sound and a message will be displayed on the Driver Information Centre (DIC) display on the instrument cluster.
Step 3
Bring the vehicle to a complete stop and select Reverse (R). Reverse into the parking space at less than 8km/h using only the accelerator and the brake. The APA system will automatically control the steering.
Step 4
Follow the instructions displayed on the DIC display. When the parking manoeuvre is complete, a beep sounds and a message is displayed on the DIC screen.
Step 5
If the vehicle speed exceeds 8km/h or you hold the steering wheel too firmly during a parking manoeuvre, the system will automatically deactivate. To deactivate the system at any time, press the APA button on the left hand side of the centre console.
Things you need to know

Was this helpful?

No Yes
Step 1
The Electronic Cruise Control enables the car to be set to automatically travel at a specified speed between approximately 30km/h and the car’s maximum speed, without the need to keep your foot on the accelerator. To turn the system on or off, press the Cruise Control button on the left hand side of the steering wheel controls. When turned on, a white control icon will be displayed in the instrument cluster.
 
Step 2
To set the speed, accelerate to the desired speed and turn the thumbwheel control on the steering wheel to SET/-. The control icon in the instrument cluster will illuminate green, and on some models, the set speed will also be displayed. At any time you can override the setting by pressing the accelerator pedal, which when released, will return the car to the set speed.
Step 3
To increase the set speed, turn the thumbwheel control to RES/+ and hold to increase continuously or toggle it repeatedly to increase speed in small increments. Alternatively press the accelerator and then SET/- once you have reached the new desired speed. To decrease the set speed, turn the thumbwheel control to SET/- and hold or toggle repeatedly until the new speed is reached. 
 
Step 4
To deactivate Cruise Control but not switch it off, press the deactivation button on the steering wheel control. The control icon will change to white and the Cruise Control can be reactivated to the previous set speed by turning the thumbwheel control to RES/+ once the car’s speed is above 30km/h.
 
Step 5
The Cruise Control system is automatically deactivated if the vehicle speed falls below 30km/h or 25km/h less than the set speed, the brake or clutch pedal is depressed, the transmission is in N or ESC is operating. Cruise Control cannot be activated until the brake has been pressed once and for manual vehicles, it cannot be activated when in first gear.
 
Things you need to know

Was this helpful?

No Yes

Vehicle Operating - FAQs

If you are not receiving Side Blind Zone Alerts, check the feature is not turned off through the radio customisation menu. If the feature is on, ensure the rear bumper is clean of any dirt or mud as this can prevent the alerts from activating. Any damage to the rear bumper where the radar is located can also cause false or no alerts.
Side Blind Zone Alert will not report an object if the difference in speed between your vehicle and object of interest exceeds 16kph. If your vehicle is being overtaken, you will not receive an alert if the difference in speed is 65kph or greater.

Bluetooth® Wireless Technology:

Bluetooth® Compatibility...

Model Software Call Handling Enhanced Voice Control Phonebook Access Audio Streaming SMS Text Messaging
  • Compatible - The tested phone and software version is compatible with the Bluetooth® function listed.
  • Partially Compatible - The tested phone and software version may only partially function with the Bluetooth® function listed.
  • Not Compatible - The tested phone and software version is not compatible with the Bluetooth® function listed.
  • Text Message - Feature available with Apple CarPlay® and Android® Auto.
iPod, iPhone and Apple CarPlay are registered trademark of Apple Inc. Android is a registered trademark of Google Inc.

Important Information

The smartphones listed have been tested for compatibility with vehicles fitted with Holden Mylink by a third party under controlled conditions. Performance of your smartphone in Holden vehicles may vary in the future based on smartphone software versions and network coverage, therefore this information should be used as a guide only. If your smartphone supports Bluetooth® but is not listed on the website, this simply means it has not been tested for compatibility. However, there is a possibility that some of the Bluetooth® features may still work, but neither partial nor full functionality can be assured.

For these reasons please consult your local Holden Dealership or call Holden Customer Care on 1800 GM Holden (1800 46 465 336) if you require further information. Please note that smartphones are warranted by their manufacturer, not Holden.

Things you need to know

How can we improve this Tutorial?

We will endeavour to get back to you if possible

What do you need help with?

e.g. My bluetooth doesn't connect, and I keep getting an error mesage 404 on my phone.

Thank You

We appreciate your feedback.

Holden New Zealand Dealers

Street View
X