Holden.Go Better
Ute Omega
Automatic V6
Compare Another Model
All Specifications
   
Engine Specifications
3.6L 60-degree Double Overhead Cam V6 with 4 valves per cylinder. Twin knock control sensors with individual cylinder adaptive control. On-board diagnostics. Continuously variable camshaft phasing for inlet cams.
Bore x stroke (mm)
Capacity (cc)
3564
Compression ratio (:1)
10.2
Power
175kW @ 6500rpm (ECE, kW)

Maximum figures as per ECE regulations

Torque
325Nm @ 2400rpm (ECE, Nm)

Maximum figures as per ECE regulations

Transmission
4-speed automatic transmission
Gear Ratio 1st
3.06
Gear Ratio 2nd
1.63
Gear Ratio 3rd
1.0
Gear Ratio 4th
0.7
Gear Ratio 5th
-
Gear Ratio 6th
-
Final Drive Ratio
3.27
Reverse Gear Ratio
Fuel economy (L/100km)
10.9

Fuel economy based on ADR 81/02 testing for combined urban/extra urban driving. These figures are provided to assist you in comparing the fuel consumption of this vehicle with other vehicles. Fuel consumption depends on factors such as traffic conditions, vehicle condition, vehicle load and your driving style.

CO2
259 g/km
Green Rating
Green Rating 5

Figures sourced from greenvehicleguide.gov.au

Green Vehicle Guide Star Rating
3.5 GVG STAR rating

Figures sourced from greenvehicleguide.gov.au

Air Pollution
8.5

Figures sourced from greenvehicleguide.gov.au

Recommended fuel
E10, ULP or PULP for slightly higher performance
Fuel tank capacity (L)
73
Exhaust
Single exhaust outlet (stainless steel)
Brakes
Four wheel disc. Ventilated discs - front and rear.
Electronic Stability Control (ESC)
Incorporating: Anti-lock Braking System (ABS), Electronic Brakeforce Distribution (EBD), Electronic Brake Assist (EBA), Traction Control System (TCS)
Suspension, front
Front suspension: Direct acting stabiliser bar. Coil spring
Suspension, rear
Rear suspension: Multi-Link Independent Rear Suspension (IRS). Coil spring. Stabiliser bar
Steering
Variable ratio rack and pinion
Turn circle (kerb to kerb, m)
11.7
Towing capacity (kg)
Maximum towing: 1600. Maximum towing speed with manual transmission: 100km/h. Holden approved 1200 and 1600 towing equipment is available. See your Holden Dealer for details.
Service
The complimentary inspection is due at 3,000km or 3 months (whichever occurs first). The first service is due at 15,000km or 12 months (whichever occurs first) and then every 15,000km or 12 months (whichever occurs first) since the last service. Additional services may be required under certain driving conditions such as when towing (refer to owner's handbook).
Kerb weight (kg)
1696.0

Includes A/C and all fluids. Weights are approximate. Production variations may occur.

Track, front (mm)
1602
Track, rear (mm)
1618
Wheelbase
3009.0
Exterior length dimensions (mm)
5055
Exterior width dimensions, excluding mirrors (mm)
1899.0
Exterior height dimensions (mm)
1497
Exterior ground clearance dimensions (mm)
100
Interior front leg dimensions (mm)
1071
Interior front shoulder dimensions (mm)
1501
Interior front head dimensions (mm)
985
Interior front hip dimensions (mm)
1439